Designed for the expert skier, the Elite delivers dramatic speed and agility, taking your skiing experience to a new level. All-new Resin Transfer Molding (RTM) prevents carbon slip, stiff points, and air bubbles during construction, leaving the body with clean, sharp edges. Stiffness is maintained through the sides of the fore body to take unnecessary weight out of the largest area. The 1/4"-thick tip area retains maximum energy throughout a turn. At 0.800" thick, the Elite creates very little drag when the ski is on edge. The Extended Pivot Point towards the rear allows you to decide how aggressive you want the edge change to be. A 7° sidewall angle runs front-to-tail to create maximum lift and stability. The Elite's 48° bevel configuration keeps the ski up on the water without losing any tracking ability. Rounded tail bevels allow the tail freedom in the rotation of the turn, eliminating resistance at the end of the turn so you can maintain momentum. The 12" flat point is further back than most with a 37" C/L to allow a more central balance point and a less sensitive ride. A semi-square tail allows enough forgiveness in the turn yet gives maximum stability into an edge change. Adjustable fin included.

Blem (Factory Second)

67 Inch Only

Sector Boot with Sector RTP 8-11 & 11-14 (Note that these are a small fit please call for details on the fit of these boots!!)

• Manufactured By

  O'Brien